[STYLE X] This is brass wire.

0.5 / 0.8 / 1.0 / 1.5 / 2.0 / 2.5 / 3.0mm Seven sizes are available.

Includes 3 10cm long brass wires.

It is used for remodeling the model, parts, etc.

(0.5mm ~ 0.8mm can be used as nickname parts.)




The picture below is "how to use". Please note when using the product.

*You can purchase tools (nippers, instant adhesives, etc.) necessary for using brass wire products from the link at the bottom of the article.

1. Cut the required length of brass wire.

2. Drill a hole where the brass wire will be connected.

3. Put an instant adhesive, etc. into the hole.

4. The preparation also inserts a brass wire.

5. Drill a hole in the object to be joined in the same way and join the two objects together.

<Caution>

1. If a brass wire with a thicker size than the hole size is inserted, the product may rupture.

2. Please note that 0.5mm ~ 0.8mm is easily bent even with a weak force.

3. If you change the cut surface when inserting the brass wire, it is possible to reinforce the joint more easily.

4. When cutting brass wire, be sure to use a metal cutter.

5. The cut surface of the brass wire is sharp, so please be careful about abrasions.

6. When cutting the product, please be careful as the cut fragments may splash into your eyes.


Some of the images on this page are images produced by Delphi Decal. Theft is prohibited.